Ohm's Law Calculator

Instantly calculate Voltage, Current, or Resistance (V=IR) for any electrical circuit.

Feedback

Enter values to compute result

 
0

Mastering Ohm's Law Calculator

Ohm's Law expresses the fundamental linear relationship between potential difference (voltage), electric current, and electrical resistance across a conducting element. Voltage acts as the electromotive force driving electric charge (1 Ampere = 1 Coulomb per second) against the circuit's inherent resistance. It serves as the foundational principle for electronic circuit design, power dissipation calculations, component selection, and electrical safety analysis.

Formula & SI Units

V = I × R

  • V (Voltage): Electrical potential difference or electromotive force across the component. SI unit: Volts (V, or Joules per Coulomb).
  • I (Electric Current): Flow rate of electric charge moving through the conductor per unit time. SI unit: Amperes (A, or Coulombs per second).
  • R (Resistance): Opposition to the flow of electric current within the material. SI unit: Ohms (Ω, or Volts per Ampere).

How to Use This Tool

  1. Step 1: Select Ohm's Law (V = IR) from the Electromagnetism category.
  2. Step 2: Choose your target parameter (Voltage, Current, or Resistance) from the dropdown menu.
  3. Step 3: Enter the numerical values for the remaining two variables along with their units.
  4. Step 4: Press Solve to compute the missing electrical circuit value instantly.

Worked Example (Calculating Electric Current in a Simple Resistor Circuit)

Scenario: A circuit contains a 12 V power source connected directly across a fixed resistor with a resistance of 4 Ω. Calculate the electric current flowing through the circuit.

Given: Voltage (V) = 12 V, Resistance (R) = 4 Ω.

  1. Identify the target variable: Electric Current (I).
  2. Rearrange the formula to solve for current: I = V / R.
  3. Substitute the given circuit values into the equation: I = 12 V / 4 Ω.
  4. Perform division: 12 / 4 = 3 A.
  5. Power dissipation check: P = V × I = 12 V × 3 A = 36 Watts dissipated as heat.

Result: The electric current flowing through the circuit is 3 A (Amperes).

Related Solvers

Explore other dedicated physics and thermodynamics equation solvers:

Frequently Asked Questions

No. Ohm's Law applies strictly to ohmic conductors (such as metallic wire resistors) where resistance remains constant regardless of applied voltage. Non-ohmic devices, including semiconductor diodes, transistors, LEDs, solar cells, and gas discharge lamps, exhibit non-linear current-voltage characteristics that do not conform to constant V = IR.
In most metallic conductors, electrical resistance increases as temperature rises because thermal lattice vibrations scatter flowing electrons. Conversely, in semiconductor materials, resistance decreases with rising temperature because thermal energy liberates additional free charge carriers into the conduction band.
If circuit resistance approaches zero while voltage remains non-zero, current mathematically approaches infinity, causing a short circuit. In practical circuits, excessive current generates rapid Joule heating, blowing protective fuses, tripping circuit breakers, or causing catastrophic component failure.